Our 65-70 Mustang Sheet Metal Kit is designed make the integration of our 65/70 Mustang Chassis into your 65/70 Mustang as seamless as possible. While this sheet metal kit is not required to install our chassis, without it you are responsible for designing/making your own sheet metal unibody, which although allowing for your own customization, is a considerable amount of additional work that may or may not be feasible with the tools at your disposal.

This sheet metal kit includes a firewall, main floor pans, trunk floor pans, and inner wheel wells, all made from 18ga cold rolled steel. They are all designed so that the installation process is as simple as putting it into position, clamping it into place, and making a row of rosette welds along each flange. Optional addons include a custom transmission tunnel, fender wells and radiator core support and are only available if the chassis is installed by us.

The firewall extends side to side from the flange of one outer cowl panel to the other. It is made to fit right up against the upper cowl panel lip. It does require a hole be cut into it for the steering column.

The inner wheel wells are designed to be clamped onto the flange of stock outer wheel wells and rosette welded along the flange. This means that you are not required to cut out and re-skin your quarter panels or separate the outer wheel well from the quarter panels, which are both very labor intensive tasks.

Information regarding the Mustang Sheet Metal Kit installation process can be attained by contacting us.

***NOTE***

This kit is intended to be used and comes with our 65/70 Mustang Pro Chassis.

Contact us for questions about the sheet metal kit.